| °April, 2012 |
KANEKO exhibited at CMEF Spring
2012 in Shenzhen, china.
KANEKO will attend Design and Medical Device Conference in
Minnesota, USA
|
| °March, 2012 |
New Equipment was purchased!
3 set of CNC Lathe
3 set of Machining
Center
|
| °February, 2012 |
KANEKO exhibited at MD&M West
2012 in California, USA
KANEKO exhibited at KIMES 2012 in Seoul, Korea
New Equipment was purchased!
1 set of Machining
Center
|
| °January, 2012 |
KANEKO exhibited at Arab Health in
Dubai
New Equipment was purchased!
1 set of CNC
Lathe
|
| °November, 2011 |
We will participate in MEDICA
exhibition in Dusseldorf / Germany, 16-19 November 2011
|
| °June, 2011 |
Kaneko
exhibited at the following exhibitions.
49th
International Paris Air Show Le Bourget
Date:
Trade
Day: June 20 (Mon) - 23 (Thu)
Public Day: June 24 (Fri) - 26
(Sun)
Venue: Parc d'Expositions Paris Le Bourget
Booth: Hall 4
D-50 (JAIF)
2nd Medical Technology Expo
Date: June 22 (Wed) - 24 (Fri)
Venue: Tokyo Big
Sight
Booth: 51-22
 
|
| °April, 2011 |
KANEKO
exhibited at the CMEF Spring 2011 in Shenzhen, China
Date: April 16 (Sat) - 19 (Tue)
Venue: Shenzhen
Convention & Exhibition Center
Booth: Hall2 G62
 
|
| °March, 2011 |
KANEKO exhibited at the Asian
Aerospace International Expo & Congress in Hong Kong.
Asian Aerospace
International Expo & Congress
Date: March 8 (Tue) -
10 (Thu)
Venue: Asia World-Expo
Booth: 7G23
|
| °February, 2011 |
KANEKO exhibited at the MD&M
West 2011 in California, the United States.
Date: February 8 (Tue) - 10 (Thu)
Venue: Anaheim
Convention Center, California
Booth: 3499
 
|
| °January, 2011 |
Inauguration of our Iwaki Works in
Fukushima prefecture, Japan.
 
For expanding KANEKO's capabilities, we built a new factory in
Iwaki city.
Site area: 7906.1128 m2
Building area: 910.53
m2
New Equipments were purchased!
2 sets of
CNC Lathe
2 sets of Machining Center
|
| °November, 2010 |
New Equipment was purchased!
1 set of CNC Precision Cylindrical Grinder
|
| °October, 2010 |
New Equipments were purchased!
3 sets of Machining Center
|
| °July, 2010 |
KANEKO exhibited at the Farnborough
International Air Show 2010 in UK.
We were introduced
as excellent company in Saitama.
SBSC (Saitama Business
Support center) introduced Kaneko Manufacturing Company
as one of
the excellent companies in Saitama in their website below. You can
find our
five strengths and interview article with President
& CEO.
http://www.saitama-j.or.jp/sbsc/english/fundamental_power/vol_001.html
New Equipment was purchased!
1 set of CNC
Lathe
|
| °June, 2010 |
KANEKO exhibited at the 1st Medical
Technology Expo in Tokyo, Japan.
|
| ° March, 2010 |
New Equipments were purchased!
1 set of CNC Lathe
1 set of Cutting
Machine
|
| °February, 2010 |
| KANEKO exhibited at the MD&M
West 2010 in California, USA.
|
| ■November,
2009 |
| KANEKO manufactured the City
character "NU" of Saitama using metal ingot by 5-axis machining
techniques. We received full appreciation from the Mayer.
|
| °November, 2009 |
| KANEKO was successfully authorized
as "Technical Brand Company" by Saitama City.
This authorization was given to the local companies who
cultivated creative and
innovative technologies.
The ceremony
was held in the first day of "Collabo-Saitama 2009" in Saitama Super
Arena.
President Harufusa Kaneko left end of front
row.
|
| °October, 2009 |
New Equipment was purchased!
1 set of CNC Lathe
|
| °September, 2009 |
New Equipment was purchased!
1 set of Electric Discharge Machine
|
| °July, 2009 |
New Equipment was purchased!
1 set of CNC Lathe
|
| °June, 2009 |
New Equipment was purchased!
1 set of Machining Center (320 x 280 x 300 mm)
|
| °March, 2009 |
New Equipment was purchased!
1 set of CNC Lathe
|
| °December, 2008 |
New Equipments were purchased!
1 set of CNC Lathe
1 set of Bench Precision Compact
Lathe
|
| °September, 2008 |
New Equipments were purchased!
2 sets of High-speed Machining Centers for optical parts
of medical applications.
Welcomed Aircraft Manufacturer: B
to KANEKO for factory tour on 23rd.
  |
| ° May,2008 |
KANEKO attended the "Difficult
machining technology show" during 14th - 17th.
|
| °January, 2008 |
New Equipments were purchased!
2 sets of High-speed Machining Center for machining
airframe part of B787
1 set Large Machining Center
(2000×1000×800㎜）
For the extension of business, the new
equipments were purchased.
|
| °June, 2007 |
New Equipments were purchased!
2 sets of 5-axis Machining Center
1 set of φ800 CNC
Vertical Lathe
|
| °May, 2007 |
KANEKO was successfully awarded the
"The top 300 energetic SME in 2007" by the Ministry of Economy,
Trade and Industry.
|
| °May, 2006 |
New Equipments were purchased!
1 set of 5-axis Machining Center
1 set of NC Lathe
|
| °May, 2006 |
Equipment strengthening
(introductory schedule)
5 axis machining center :
one-set
NC compound lathe : one-set
The above-mentioned
equipment reinforcement is planned with business
expansion.
|
| °September, October,
2005 |
Information of equipment
strengthening
5 axis machining center :
three-set
large-sized 4 axis machining center : two-set
two-set large-scale-dimensional measuring instrument :
one-set
I reinforced the above-mentioned equipment with
business expansion.
|
| °August, 2005 |
The Kaneko, Co.,Ltd. factory new
office building establishment
 |
 |
 |
| Kaneko, Co.,Ltd. factory
new office building | |
|
|
|
| °June, 2005 |
We exhibited at M-Tech 9th Machine
Components Technological Exhibition from 22 through 24 June,
2005
The 9th Machine Components Technological
Exhibition ended successfully.
We wish to express our gratitude
to the people for coming to the exhibition.
Thank you.
|
| °August 13, 2004 |
Awarded ISO 9001/JIS Q9100
certificate
We were not only awarded ISO 9001
quality certification, but also awarded
JIS Q9100, a
quality standard for aerospace industry.
*The
management system registration certificate (PDF file) can be
viewed.
ISO 9001
registration certificate (291KB) / JIS Q 9100 registration
certificate (282KB) |
 |
 |
| JQA-QMA11566 |
JQA-AS0014 | |
|
| °June, 2004 |
We exhibited at M-Tech 8th Machine
Components Technological Exhibition from 16 through 18 June,
2004
The 8th Machine Components
Technological Exhibition ended successfully.
We wish to express
our gratitude to the people for coming to the exhibition.
Thank
you.
°Machined parts which attracted attention during the
Machine Components Technological Exhibition.
|
*These parts are made of aluminum
alloy. We can process all types of materials such as metal, resins,
and ceramics.
|
| °2004 |
Started to prepare for ISO 9001/JIS
Q9100 certification
"We aim to get certified to the
aerospace quality standard, JIS Q 9100."
We not only aim to
get certified to the international quality standard, ISO 9001 but
also certified to the quality standard for aerospace industry, JIS
Q9100.
In order to further improve the quality of our products
and services, all employees collaborate each other towards the
certification.
|
| °July, 2003 |
We exhibited at M-Tech 7th Machine
Components Technological Exhibition from 25 through 27 June,
2003
The 7th Machine Components
Technological Exhibition (at Tokyo Big Sight) ended successfully. We
wish to express our gratitude to the people for coming to the
exhibition.
Thank you.
|
| °May, 2003 |
Introduced super precision
machining center YBM950V (Yasuda Industry)
We introduced 5-axle
control CNC jig boring machine "YBM950V" (Yasuda Industry) in
order to achieve 5-axle processing, highly accurate
processing, and fast processing.
In order to meet our
customer's needs, we will improve our technology for more
accurate processing. |
 |
| Machining center (Yasuda
Industry) YBM950V
| |
|
| °2003 |
Preparing for ISO9000
certification
Kaneko Seisakusho Co., Ltd. strives to get
certified to all ISO9000 family.
The ISO9000 family standard is
a criterion for evaluating whether necessary quality management
system is in place and whether such system is implemented properly
in order to continuously provide products and services that meet
customer's requirements and comply with statutory and public
regulations.
|
| °May, 2002 |
3-dimensional CAD/CAM "CATIA"
upgrade version (V5)
We introduced
3-dimensional CAD/CAM software "CAIA V5" (Dasso system) in
order to achieve curved surface processing and 5-axle
processing.
We believe that 3D data as the means of
sending design information will not only shorten the
lead-time, improve precision, and save cost, but also help our
customers to incorporate quality and cost factors from early
stage of new product development. |
 |
| 3-dimensional CAD/CAM
software "CATIA V5"(Dasso
system) | | |
